Roberts Gorden CoRayVac CRV-B-9 - Manual (Page 28)

CRV-S ERIES I NSTALLATION , O PERATION AND S ERVICE M ANUAL
22
Step 8.2.2 Reflector Joint Installation
Step 8.2.3 Reflector Joint Detail
FIGURE 13: Reflector Joint Detail
Cut away contour
with tin snips.
Punch/drill six 3/32" (2 mm) holes.
Install reflector
end cap.
Attach reflector joint
with six #8 sheet
metal screws.
Reflector
Reflector
Joint