Roberts Radio CR99712 - Manual (Page 15)

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-..
020.8758.0338.(Mon-Fri)
Listening to the radio
1. Switch on the radio by pressing the On/Off button.
2. Select the required waveband using the Waveband switch.
3. Tune in to the desired station using the Tuning control.
4. Adjust volume using the Volume control.
5. The Wire aerial located on the rear of your clock radio is for FM
reception. The wire should be fully extended and positioned for optimum
reception.
For MW reception there is a built in ferrite aerial. Rotate your clock
radio to the position giving best reception.
6. To switch off press the On/Off button.
14
1
2
3 4
6