5 led activities description – Rosewill WIRED INTERNET CAMERA RXS-3211 User Manual
Page 7
Wired Internet Camera
RXS-3211 User Manual
6
Figure 1.4-2 Rear View
Stand Connector: Connects to any standard tripod / camera wall holder.
WPS / Reset Button: Press and release this button to activate WPS mode
(WPS mode is not available in Wired Camera); press and hold this button for
10 seconds to clear all settings of this camera and return to factory default.
Power Jack: Connect to 5V power adapter.
LAN Jack: Connect to LAN by Ethernet cable.
1.5 LED Activities Description
LED Name
Status
Description
Slow Blinking
Camera is booting
Steady On
Camera is correctly powered
Blue
Off
Camera is off
On
Camera is correctly powered
Off
Camera is not connected to LAN
Green
Flash
Camera is logged in
WPS
Reset to Default
Power Jack
With 5V DC
LAN port
Stand Connector