Rosewill GIGABIT RC411 - Manual (Page 6)

Gigabit PCIe LAN Card RC411 User Manual
5
slot correctly. Please insert the card firmly into the PCI Express slot or try another slot.
How to deal with a exclamation point on Ethernet Host controller
1. Please shutdown your computer and move the card to another available slot then re-install
Gigabit Ethernet PCI Express Card driver again.
2. Please point on this device then right-chick on the mouse.
3. This exclamation point usually means there is a resource conflict between the Gigabit Ethernet
PCI Express Card and another card in your system. Please move the card to another available
slot. Restart your computer. Windows will then re-configure itself and re-assign resources. Check
your device manager again. If the exclamation point is still there then repeat the process until it
no longer appears.
I can not use Gigabit Ethernet transfer speed
1. Please affirm your Ethernet environment supporting Gigabit structure.
2. Please use CAT6 UTP/STP cable.
How to configure 10/100/1000Mbps Ethernet structure
Connect 10/100/1000Mbps Ethernet over unshielded twisted pair (UTP) cable. Gigabit Ethernet PCI
Express card has the ability of automatic sensing and operating on either speed without manual
reconfiguration.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for complete warranty information and future support for your product.