Rosewill GIGABIT RC411 - Manual (Page 4)

Gigabit PCIe LAN Card RC411 User Manual
3
Driver Installation
For Windows® 2000/XP/Server 2003
Once the Windows® 2000, XP and Server 2003 startup. Gigabit Ethernet PCI Express Card will be
detected by system. Following is the procedures for installing Gigabit Ethernet PCI Express Card
driver under Windows® XP Service Pack 2 operating system.
1. When Found New Hardware Wizard Window pop-up, please click “Cancel” button to cancel
the driver installation for the device at this moment. The driver for this device will be installed in
the next step.
2. Please insert the CD driver bound with Gigabit Ethernet PCI Express Card into your CD-ROM
Drive.
3. At the Windows desktop click Start, then Run.
4. Type D:\ RC-411\setup.exe, then click OK. (Change D:\ to match your CD-ROM drive letter)
5. Follow the on-screen instructions to complete the instructions to complete the installation to
complete the installation.
6. Restart Windows to complete the installation.
For Windows® Vista
In Windows® Vista, when the system is booted up it automatically detects the Gigabit Ethernet PCI
Express Card and install the Gigabit Ethernet PCI Express Card with in-build drivers. Following is the
procedures for upgrading Gigabit Ethernet PCI Express Card driver under Windows® Vista operating
system.
1. Please insert the CD driver bound with Gigabit Ethernet PCI Express Card into your CD-ROM
Drive.
2. At the Windows desktop click Start, then Run.
3. Type D:\RC-411\Vista\setup.exe, then click OK.
(Change D:\ to match your CD-ROM drive letter)
4. Follow the on-screen instructions to complete the instructions to complete the installation to
complete the installation.
Restart Windows to complete the installation.