Radio Shack 22-1670 - Manual (Page 11)

11
3. Clean the selected windshield area, position the
suction-cup mount on the windshield, and press
firmly on each suction cup to secure it into place.
4. Adjust the suction-cup mount until the base plate is
level, then fully tighten the screw securing the base
plate.
5. Slide the detector onto the base plate until it snaps
into place.
To remove the suction-cup mount from the windshield,
lift up on the tab on each cup to release the suction.
22-1670.fm Page 11 Friday, August 6, 1999 10:17 AM