RCA RP5035 - Manual (Page 18)

Advanced Operation
EN
14
Cut
You can erase unwanted parts from
your recording.
1. Select folder.
2. Select file.
3. Start playback of
the file with the
unwanted part.
4. Press ERASE to
mark the start of
the unwanted part,
“CUT-S” shows on
display.
5. Press ERASE to
mark the endof the unwanted
part, “CUT-E” shows on display.
6. Press ERASE again to confirm
cutting (or press STOP to cancel)
7. “WAIT” will show on the display.
8. After the memory rearrangement
completed, the unit will go to STOP
mode.
Format (Caution! All data
inside the memory will be
erased)
You can format the internal memory
when needed. (e.g. compatability
problem, etc.)
The procedures are as follow:
1. Turn on the unit.
2. Press ERASE, “DELETE” will flash
on the display.
3. Press and hold REC for 3 seconds,
“FORMAT” will flash on the
display.
4. Press and hold ERASE, the
completed percentage will show
on the display, formatting is in
process.
5. After the formatting is completed,
the remain time of the selected
memory will show on the display.
Tip:
Cutting, inserting new
segments and adding
appendix will only update the
recorded time length, without
changing recording time and
date.
SP
ONE
AM
A
SP
ONE
AM
A
SP
DICT
A
SP
DICT
A
SP
DICT
A
SP
DICT
A
REMAIN SP
DICT
A
RP5030 EN(A ver.) 7/3/06 4:56 PM Page 19