Roberts Radio R9958 - Manual (Page 19)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Tuning step size
In Europe and other parts of the world MW tuning steps are 9kHz, in
America the MW tuning step size is 10kHz.
On FM tuning steps can be set to either 50 or 100kHz.
1. Ensure that your radio is switched off.
2. Press and hold down the Step/Preset 3 button for 2 sec. The display
will fl ash the current FM step size. Continue holding down the Step/
Preset 3 button for 3 - 7 sec until your radio beeps and the display
will fl ash FM and the current tuning step will be shown.
3. Press the Tuning Up or Down button to change required FM tuning
step size.
4. Press and release the Step/Preset 3 button to display the MW step
size. The display will fl ash the current tuning step.
5. Press the Tuning Up or Down button to change MW step size.
6. Complete the setting by pressing the Step/Preset 3 button.
3,5 3,5
2
4,6
18