Roberts Radio R9958 - Manual (Page 18)

Recalling selected nap timer settings in
preset memories
1. Press and release the Nap timer button.
2. Momentarily press the required Preset button, the preset number
and nap timer setting will appear in the display
3. Press the Nap timer button again to complete the setting. The timer
will begin to count down.
2
17
2
Storing Nap timer settings in preset memories
There are 5 memory presets available if you wish to change the preset
nap timer settings.
1. Set nap timer as instructions on page 15.
2. When the selected nap timer setting is selected, press and hold
down the required Preset button until the radio beeps (greater than
2 seconds) The preset number will appear in the display and the nap
timer setting will be stored under the chosen preset button.
3. Press the Nap timer button again to complete the setting. The timer
will begin to count down.
4. If needed, repeat this procedure for the remaining presets. Nap timer
settings stored in preset memories may be overwritten by following
the above procedure.