RoyalTek GPS SPEED CAMERA WARNING DEVICE RCD-1000 - Manual (Page 7)

English 7
*Depending on local SCDB conditions.
Event LED Display Audio Alarm
1 System Initialize Green+Red (No 1+No 2+No3), Sweeping 1 beep
2 GPS Search
Green (No 1), Blinking
3 GPS is fixed
Green (No 1), Glowing 2 beeps after GPS Fixed
4
Memory full /Erase Not available for this model X
Not exceed speed Glowing 3 beeps
5
Approach Fix Camera Zone and
pre-alert (distance less than* 1500
meter- Notification range)
Over speed Red (No 2+No3) Blinking 1 time per second
Continuous Beeps continuously
Not exceed speed Glowing 3 beeps 6 Approach Fix Camera Zone and
pre-alert (distance less than *500
meter- Critical range)
Over speed
Red (No 1+No
2+No3)
Blinking 1 time per second
Continuous 3 beeps per second
continuously
Not exceed speed Glowing 3 beeps
7
Approach Mobile Camera Zone or
User defined POI and pre-alert
(distance less than *1500 meter-
Notification range)
Over speed
Amber (No 2+No3)
Blinking 1 time per second
Continuous Beeps continuously
Not exceed speed Glowing 3 beeps
8
Approach Mobile Camera Zone or
User defined POI and pre-alert
(distance less than *500 meter-
Critical range)
Over speed
Amber (No 1+No
2+No3)
Blinking 1 time per second
Continuous Beeps continuously
9
User Defined POI Function activated Green (No 1+No 2+No3), Flashing once 1 beep
10
User Defined POI full Amber (No.2), Glowing X
11
Speed Limit function enable Red (No.3), Glowing 1 beep
12
Speed Limit function Disable X 3 beeps
13
Over Speed only (W/O Camera or POI Zone) Amber (No.3), Blinking Beeps continuously