RCA MM52110 - Manual (Page 44)

42
Menus and Features
Set the DVD Channel
When you set the DVD channel, you’re telling the monitor what input
channel to tune to when you press the DVD button on the remote.
Indicate which input you used to connect a DVD player. If you don’t have
a DVD player connected to the monitor, skip this step.
1. From the Set DVD Channel menu (at right), point to the choice that
matches the way you have your DVD connected to the monitor.
2. Press OK to select it and continue.
Set the SAT/CABLE Channel
When you set the SAT/CABLE channel, you’re telling the monitor what
channel to tune to when you press the SAT•CABLE button on the
remote.
Indicate which input you used to connect a satellite receiver, a cable box
or a set top digital converter. If you don’t have one of these components
connected to the monitor, skip this step.
1. From the Set SAT/CABLE Channel menu (at right), point to the
choice that matches the way you have your satellite receiver, cable
box, or HD receiver connected to the monitor.
2. Press OK to select it and continue.
SET SAT/CABLE CHANNEL
1 Not Connected
2 Channel 3
3 Channel 4
4 Video 1 Input
5 Video 2 Input
6 Video 3 Input
7 (S)VGA 2 Input
8 Component Input
Note that the (S)VGA2 input can be used
to connect an HD receiver so you can
receive high definition signals.
SET DVD CHANNEL
1 Not Connected
2 Channel 3
3 Channel 4
4 Video 1 Input
5 Video 2 Input
6 Video 3 Input
7 Component Input