Radio Shack ET-553 - Manual (Page 8)

8
3. Route the modular cord through the
top groove and the adapter cord
through both grooves on the bottom
of the base.
4. Plug the adapter into a standard AC
outlet.
5. Plug the short modular cord’s other
end into the wall plate jack, then
align the base’s keyhole slots with
the wall plate studs and slide the
base downward to secure it.
6. Press and lift out the handset
holder. Rotate it 180°, then snap it
back into place so it holds the hand-
set.
7. Fully extend the base’s antenna and
place it in a vertical position.
P U L S E -TO N E
D C I N 9V
TE L LI N E
43-1053.fm Page 8 Tuesday, August 17, 1999 1:26 PM