Royal Sovereign NB-1900N - Manual (Page 11)

Be careful not to allow to damage temperature sensor, as damaged
sensor could cause serious harm.
1) If film adhesive apears on the laminated pouch surface, Insert a sheet of
clean, thick paper (about 0.5mm(1/50") thickness) into the machine 2~3
times on "FUNC 4" setting. The paper will attract the excess adhesive
from the roller.
NB-1900N
11
CLEANING ROLLERS AND REMOVING FILM JAMMED
OR STUCK TO ROLLERS
1. Cleaning rollers with a clean and thick paper
1) When rollers are hot, turn on and
set "COLD" mode to cool them down.
2) Press the power button to turn off.
3) Loosen 8 retaining screws on bottom
and lift off the cover.
4) Use a recommended silicon roller
cleaning solvent such as Laminex
Poly-Off or equivalent, on a lint-free
cloth to clean residue of laminate
adhesive on exposed roller surface.
Prevent any liquid from spilling into
the unit.
5) Re-assemble the unit in reverse-order
of disassembling.
2. Cleaning rollers with cleaning solvent.
* Do not turn the unit on until the rollers are completely dry.
Wet rollers could cause serious harm.