Rangemaster 90 INDUCTION U109941 - 02 - Manual (Page 9)

7
The Clock
Setting the time of day
The LCD clock is shown in (Fig.2-13). When the clock is first
connected, the display flashes ( 0.00) and (

) alternately.
To set the time, turn and hold the Timer knob to the clock
symbol (
 ) and at the same time turn the Adjusting knob left
or right until the clock shows the time of day. Remember this
is a 24-hour clock. Let go of the Timer knob and it will spring
back to the vertical, oven manual setting.
Minute Minder
Turn the Timer knob to the right to the (  ) minute minder
setting – it should click into position (Fig.2-14).
Use the Adjusting knob to set the time you need (Fig.2-15).
You can either turn the knob back to the vertical manual
setting () to keep an eye on the time of day, or leave it in the
() minute minder position as the time ticks down.
To stop the beeper when it sounds, turn the Adjusting knob
anti-clockwise.
To stop the left-hand oven at a specific time of
day
Turn the Timer knob to the () position (Fig.2-16).
Use the Adjusting knob to set the time at which the oven is
to stop. You can set the oven to turn on at any time over the
following 24-hour period. AUTO shows in the display
(Fig.2-17).
Turn the Timer knob to the bottom ‘AUTO’ setting. Once the
set time is reached, the beeper sounds. Turn the Timer knob
to the vertical () to return to manual cooking.
To start and then stop the left-hand oven using
the Timer
Before you set the clock, decide on both the ‘cook time’, which
is the period of time you want the oven to cook, and the ‘stop
time’, which is the time of day at which you want the oven to
stop cooking.
You cannot set a start time directly – this is set
automatically by a combination of the ‘cook time’ and
‘stop time’.
Turn the Timer knob to the () position (Fig.2-18).
Use the Adjusting knob to set the ‘cooking time’ you need
(Fig.2-19).
Turn the Timer knob to the () position. The display will
show the current time of day plus the ‘cook time’ you just set.
Use the Adjusting knob to set the ‘stop time’ required
(Fig.2-20).
The ‘stop time’ is displayed, followed by ‘AUTO’. Set the oven(s)
to the cooking temperature you need. Turn the Timer knob to
the ‘AUTO’ setting.
When your cooking is finished, the beeper sounds. Turn the
Timer knob to the vertical () to return to manual cooking.
ArtNo.300-0005 2BC
minute minder setting
ArtNo.300-0006 2BC
minute minder setting 2
ArtNo.301-0007 2BC
Stopping the oven 1
ArtNo.301-0008 2BC
Stopping the oven 2
Fig.2-14
Fig.2-15
Fig.2-16
Fig.2-17
ArtNo.301-0009 2BC
Setting the cooking timer
ArtNo.301-0010 2BC
Setting the cooking time
Fig.2-18
Fig.2-19
ArtNo.301-0008 2BC
Stopping the oven 2
Fig.2-20