beautypg.com

Set up your tv/dvd operate your tv/dvd, Using the dvd player, Using the menu system – RCA 52D0207A User Manual

Page 2: Watching tv

background image

fig.3

TV/DVD

Number

buttons

– (DISPLAY)

SETUP/

TV MENU

SCREEN

SIZE

ENTER

▲/▼/◀/▶

DVD
MENU

PLAY

STOP

INPUT
SELECT

Set Up Your TV/DVD

Operate Your TV/DVD

Make sure you have already connected your TV/DVD to devices and a signal source, plugged in the
TV/DVD, and put batteries in the remote.

Now, turn on the TV/DVD and start the setup. (POWER indicator on the front of the unit changes green.
It may take approx. 10 seconds for a picture to appear on screen.)

Starting setup
The Starting Setup menu (fig.3) appears the first time you turn on the TV.

• Set the on-screen language

(If English is your preferred language, you can skip below and advance to the next step.)

Press

or

until your language is shown.

• Choose the Signal Type (Air/Cable selection)
Press

or

to select “Signal Typel”

(If you connected Cable TV service to your ANT jack, you can skip below and advance to the next step.)

Press

or

to choose “Air” (this is for antenna users).

• Automatic Search

Press

or

to select “Automatic Search”, then press

or

ENTER

to begin the “Automatic Search”.

The search takes some time as it is looking for analog, digital and digital sub channels. Once the search is
complete, the TV/DVD tunes to a channel.

– For more information, see OWNER’S MANUAL, page 15 –

Using the DVD player

To use the DVD player, press

TV/DVD

(“DVD” appears at the bottom of the screen). Insert a disc into the side

slot load with disc’s label facing towards you. If necessary, press

PLAY

to play the disc. To switch back to TV

mode, press

TV/DVD

.

The DVD player can play DVD discs, Audio CD discs, CD-R/RW discs with mp3, Windows Media-formatted
content, and JPEG files.

Using the Menu System

The

SETUP/TV MENU

button accesses both the DVD player’s main menu and TV’s menu. To access the

DVD player’s main menu, while a disc is playing first press

STOP

and then press

SETUP/TV MENU

. Use

or

to scroll up or down;

or

to scroll left or right; and

ENTER

to make selections.

A disc is capable of having an on-screen menu that is separate from the DVD player’s main menu. The disc
menu might only contain a list of the titles and chapters, or it may allow you to change features such as
language and playback settings. To access the disc menu, press

DVD MENU

.

Watching TV

Entering Channel Numbers

Digital channels can have both primary channels (like the analog channel number) and sub channels. If 15 is the
primary channel and 1 is the sub channel the channel looks like 15-1 on screen. To tune to a such channel, press
the first 3 digits, then press the

(

DISPLAY

) button, followed by the remaining 3 digit, as

0

,

1

,

5

,

,

0

,

0

,

1

,

then press

ENTER

.

Changing Screen Formats

Your TV allows you to change the format of the picture you’ve viewing by pressing the

SCREEN SIZE

on the

remote control. Depending on the type of signal you’re viewing, you might not be able to change the format.

Viewing Devices Connected to Your TV/DVD

To view devices connected to your TV/DVD, first make sure you are in TV mode. Press

INPUT SELECT

.

Choose the input where you connected the device.
Your choices are TV, Video, Component, HDMI, PC or DVD (DVD mode).

Thank you for your purchase. Before making a trip back to the retailer, please visit www.rca.com/television for more information or contact us at 1-800-336-1900 so that we
may assist you in operating the unit, replacing missing parts, and ensuring your satisfaction with the product.

Automatic Search

Start

Auto Setup

Language

English

Signal Type

Cable

: Adjust

: Select

52D0207A_QS.indd 2

52D0207A_QS.indd 2

6/12/09 1:47:44 PM

6/12/09 1:47:44 PM

This manual is related to the following products: