RocketFish RF-NANOMSE2/RF-NANO11/12/13 - Manual (Page 6)

6
Mouse LED status
The following table lists the status of the mouse LED and its
descriptions:
Setting up the mouse
Installing the battery
To install the battery:
1 Press the tab on the battery compartment cover, then lift the cover away
from the mouse.
LED Color Description
Mouse LED Green If the battery voltage is greater than 1.1V, the LED will show green
for three seconds then turns off.
Flashing red If the battery voltage is less than 1.1V, the LED will flash red for one
minute, then turn off.
Off If the battery voltage is less than 1.0V, the LED will be off and the
mouse will not work.
RF-NANOMSE2_10-0681_MAN_V1.fm Page 6 Tuesday, June 29, 2010 4:35 PM