Ricoh Broadband. Digital TV. Phone. - Manual (Page 7)

1 To Wall Connect the set-top box
device to in-house coax wiring,
if applicable. This signal is used
to receive an Ethernet-over-
coaxial signal.
2 network Connect to the Ethernet
(CAT-5) network in your home,
if applicable.
3 USb Port Connect external USB equip-
ment approved by your service
provider to this port.
4 HDmI Connect an HDTV HDMI ™ (High
Definition Multimedia Interface)
cable from the HDTV to the
HDMI port. HDMI supports both
digital audio and video.
5 PrPbY Connect the set-top box
device to the component
video input (PrPbY) on the high
definition TV (HDTV).
6 S-Video Connect an S-Video cable
to send an S-Video signal to
your TV or VCR. This signal is
standard definition (SD) but
higher quality than other SDTV
connections.
4
(Video In)
6 7 8 9
1
2 3 4 5
) (