Radio Shack 43-3581 - Manual (Page 3)

Us
ing AC Power
3
USING AC POWER
You can power the handset using the
supplied 9V, 210 mA AC adapter.
Insert the
supplied AC
adapter’s barrel
plug into the
DC
IN 9V jack on
the back of the
charger. Route
the cord
through the
strain relief slot
and plug the
adapter into a standard AC outlet.
CONNECTING/
CHARGING THE
BATTERY
The phone comes with a rechargeable
nickel metal hydride (Ni-MH) battery
pack. Before using your phone, you
must install the battery pack, and then
charge it for about 15-20 hours.
1. Press down and slide the battery
compartment cover off.
CAUTION
You must use
a Class 2
power source
that supplies 9V DC and
delivers at least 210 mA.
Its center tip must be set
to positive and its plug
must fit the charger’s
DC IN 9V jack. The
supplied adapter meets
these specifications.
Using an adapter that
does not meet these
specifications could
damage the handset or
the adapter.
!
43-3581.fm Page 3 Thursday, January 15, 2004 1:14 PM