Ranger RCI-6300F TB - Manual (Page 7)

- 6 -
Figure 2-2 Rear Panel
1. ANTENNA
This jack accepts 50 ohms coaxial cable with a PL- 259 type plug.
2. POWER
This connector accepts 13.8V DC power cable with built-in fuse. The power cord provided with the
radio has a black and red wire. The black goes to negative and the red goes to positive.
3. PA. SP.
This jack is for PA operation. Before operating, you must first connect a PA speaker (8 ohms, 4W) to
this jack.
4. EXT. SP.
This jack accepts 4 to 8 ohms, 4 watts external speaker. When the external speaker is connected to this
jack, the built-in speaker will be disabled.
2.1.3 FREQUENCY CHART
FR. POOL
CHANNEL 1 (MHz) 2 (MHz) 3 (MHz) 4 (MHz) 5 (MHz) 6 (MHz)