Roberts Radio CR9937 - Manual (Page 13)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
12
Setting the alarms to wake to radio
1. Ensure that the radio is switched off (press StandBy).
2. Press and hold down the Alarm 1 or Alarm 2 button until the hour
digit flashes.
3. Press the Tuning Up/Down buttons to set the correct hour.
4. Press the applicable Alarm button (1 or 2) to confirm. The minute
digit now flashes.
5. Press the Tuning Up/Down buttons to set the correct minutes.
6. Press the applicable Alarm button (1 or 2) to confirm.
7. Press the Tuning Up/Down buttons to select TUNER.
8. Press the applicable Alarm button (1 or 2) to confirm.
9. Press the Tuning Up/Down buttons to select alarm volume - H
(High), L (Low) or M (Medium).
10. Press the applicable Alarm button (1 or 2) to confirm.
11. At the preselected time the radio will switch on. The radio will
switch off automatically after 90 minutes. The radio alarm may be
switched off for 24 hours by pressing the StandBy button.
12. To permanently cancel the radio alarm set the alarm time as
described, then select OFF using the Tuning Up/Down buttons.
10
2
7
1 2
3 4
5 6
7
8
9
10
11
12
4