Roland PC-600 - Manual (Page 10)

10
Media Size- Select a media size that is currently loaded into your printer. You can specify custom media sizes by
selecting other from the list and then editing the Height and Width values.
Margin- Specify custom margins, if desired.
Send- You can choose to send the Print and the Contour, the Print only, or the Contour only.
Port tab
The Port tab contains a list box for specifying the port to which your output device is connected.
Print tab
The Print tab displays basic processing settings and allows you to access your printer’s Driver Options.
Resolution- You may set the output resolution here. A higher resolution will generally result in better results but
slower output. The resolution set here is separate from the resolution used by your application.
Setting a resolution in this driver that is higher than the resolution in the application will not necessarily
improve the output.
Dither Type- This is the pattern in which the individual dots that make an image are applied to the media. Dots of
ink are arranged to fool your eye into seeing different shades.