Timer function – Rangemaster RC60 User Manual
Page 8
6
Timer Function
The timer has two settings:
•
Zone timer
•
Minute timer
Zone timer
This allows each cooking zone to be set to cook up to a
maximum of 99 minutes at a set power level. At the end of
the cooking time the zone will turn off automatically.
Activating the timer:
Select the required cooking zone and then:
1.
Using the ‘+’ and ‘–‘ keys, set the desired cooking
temperature.
2.
Press the timer key (Fig.2-15): the timer display will
illuminate with ‘00’ flashing.
3.
Set the required cooking duration by pressing the timer
key to increase the cooking time and the ‘–‘ key to
reduce the cooking time (Fig.2-16).
Note: When the ‘00’ is flashing, pressing the ‘–‘ key will
set the timer to 60 minutes.
The timer will activate automatically within a few seconds
and an indicator light will appear in the timer display
corresponding the activated zone (Fig.2-17).
Changing a previously set cooking time:
Select the required cooking zone; the red dot will light up in
the display. Press the timer key once then press the timer key
to increase, or the ‘–‘ key to reduce, the cooking time.
Interrupting the timer:
Select the required cooking zone; the red dot will light up in
the display. Press the timer key and, using the ‘–‘ key, reduce
the cooking time to ‘00’. This will switch off the timer but leave
the cooking zone on until manually deactivated.
Turning off the timer alarm:
At the end of the cooking time the hob will beep steadily for
2 minutes. Press any key to stop the alarm.
Cancelling the timer (rapid shutdown):
Select the required cooking zone; the red dot will light up
in the display. Press both the ‘+’ and ‘–‘ keys simultaneously.
Note that this will turn off both the timer and the cooking
zone immediately.
Minute Timer
The timer can also be used as a simple minute timer, up to a
maximum of 99 minutes.
Setting the timer:
Make sure that none of the cooking zones has been selected
(if a zone has been accidentally selected simply leave the hob
for 10 seconds: the dot in the zone display will go out). Press
the timer key and then set the required time, using the timer
and ‘–’ keys (Fig.2-18).
ArtNo.317-0007 60 Setting the zone timer
ArtNo.317-0007 60 Setting the zone timer
��������������������������
������������������������
ArtNo.317-0007 60 Setting the zone timer
���������������
Fig.2-15
Fig.2-16
Fig.2-17
ArtNo.317-0018 60 Setting the minute timer
��������������������������
������������������������
Fig.2-18