Set up – RedMax BT250 User Manual

Page 13

■ INSTALLING HANDLE (SE1)
• Mount the handle to the shaft tube and clamp it

at your best operating position.

■ INSTALLING DEBRIS GUARD (SE2)
• Put the debris guard on the shaft tube near the

gear box, attach it with the screw, washer and
nut provided.

■ INSTALLING CUTTING HEAD (SE3)
1. While locking the gear shaft by inserting the

attached bar into the upper holder and the
housing.

2. Rotate the cutting head to engage threads.

Hand-tighten it securely.

6. Set up

SE1

SE2

SE3

13 