RCA B-008ATD - Manual (Page 4)

DTA800-B
CH4 OUTPUT
TO TV SMART ANTENNA IN ANTENNA IN AC~120V CH3 R AUDIO L
TV
ANTENNA
VIDEO
Step 2: Connections
Option 1: Your TV has an antenna jack only
1
2
4
3
Back of the RCA converter box
From antenna
AC120V
60Hz
Connect your existing antenna cable to the
ANTENNA IN jack of the Converter Box.
Connect the RF coaxial cable (supplied) from
the OUTPUT TO TV jack of the Converter
Box to the ANTENNA jack of the TV set.
Slide the CH3/CH4 selector on the back of the
Converter Box to the channel that is not in
use in your area. The Converter Box will send
its video signal to Channel 3 or 4 on your TV.
Connect the AC power cable of the
Converter Box to a suitable wall outlet.
1
2
3
4
Box contents
The following items are included:
Setting up
Step 1: Installation
The Converter Box can be installed either horizontally or vertically. The left side of the
Converter Box can be rotated as a stand for vertical installation.
RCA Digital TV Converter Box
Remote control
(with 2 “AAA” batteries)
User Manual
(this booklet) Quick Start
Guide Program
Codes
RF coaxial cable
Horizontal installation Vertical installation
Bottom view
4
17/01/2008