Radio Shack 21-1679 - Manual (Page 6)

6
3. Slide the battery case onto the CB radio until it clicks. The
BATTERYCASEÞTSONTOTHE#"RADIOONLYONEWAY$ONOT
force it.
Replace the batteries when the sound becomes weak or
distorted, ; appears, or the CB radio stops working.
"ATTERYŸ.OTES
• Dispose of old batteries promptly and properly. Do not burn
or bury batteries.
• Use only fresh batteries of the required size and type.
• Do not mix old and new batteries, different types of batteries
(standard, alkaline, or rechargeable), or rechargeable
batteries of different capacities.
• If you do not plan to use the CB radio with batteries for two
weeks or longer, remove the batteries. Batteries can leak
chemicals that can destroy electronic parts.
Using AC Power
To power your CB radio from your home,
you will need a 12V DC power supply
that provides a minimum of 2.5A at 12V
and a DC power cord (neither included).
1. Turn off the CB radio if it is on.
2. Use the DC power cord to connect
the CB’s 12V DC PWR Jack and the
DC power supply.
3. Connect the DC power supply to an
AC outlet.
4. Turn on the CB radio to use.
#AUTIONS
• You must use a Class 2 power supply that provides regulated
13.8V DC and delivers at least 2.5A. The barrel plug’s center
MUSTBEPOSITIVEANDTHEBARRELPLUGMUSTÞTTHE#"mS
12V
DC PWR jack. Using an adapter that does not meet these
SPECIÞCATIONSCOULDDAMAGETHE#"RADIOORADAPTER
12V DC PWR Jack
Powering Your CB Radio