Troubleshooting (continued) – Radio Shack Univer 15-2138 User Manual
Page 44

8-
IN
-O
NE
R
EMOTE
P
OWERED
B
Y
K
AMELEON
TROUBLESHOOTING (Continued)
PROBLEM:
Power macro does not work.
SOLUTION:
First press MY SYSTEM once, then press PWR once.
PROBLEM:
Favorite channel function does not work properly.
SOLUTION:
Some devices (e.g., Cable Boxes or Satellite Receivers)
use two-digit channel numbers.During programming,
press ENTER or OK once after entering a channel number
(e.g., 0 2 ENTER for channel 2).See Programming
Favorite Channel Scan on page 30.
PROBLEM:
Changing channels does not work properly.
SOLUTION:
If the original remote control required pressing ENTER
to change channels, then press ENTER on the remote
control after entering channel numbers.
PROBLEM:
No remote control of volume.
SOLUTION:
See Changing Volume Lock on page 22 to lock/unlock
volume.
PROBLEM:
Bottom IR segment flashes when pressing a key, but
home entertainment device does not respond.
SOLUTION:
Make sure the remote is aimed at your home entertainment
device and is not farther away than 15 feet.
PROBLEM:
CH
▲
and CH
▼
do not work for your RCA TV.
SOLUTION:
Due to RCA design (1983-1987), only the original
remote control will operate these functions.
PROBLEM:
Pressing SCREEN one or more times in CBL, SAT, DVD,
VCR, AUX, or MY SYSTEM mode does not display a
secondary menu screen.
SOLUTION:
Although SCREEN is displayed, for these modes, there
are no additional menu screens.
44 Troubleshooting
RS 8in1 Kameleon OM rev 10/9/03 4:12 PM Page 44