Radio Shack 43-3909 - Manual (Page 3)

3
R ECEIVING A C ALL
When you receive a call, the phone rings
and
NEW flashes. NEW and the caller’s
number appear on the display. To answer
the call, pick up the handset.
NEW flashes
until you have reviewed all calls.
T
IMER
This unit is designed with a clock timer to
count up to 60 minutes in the off-hook time
(in
00:00 format). The timer appears on the
display and starts to count up when you dial
a number or answer incoming calls.
If you lift the handset and don’t dial a
number, the timer appears and starts to
count up after 10 seconds.
U
SING
P
AUSE
When you manually dial a number, you can
have your telephone pause anywhere during
the dialing sequence. Simply press
REDIAL/PAUSE at the desired location, and P
appears on the display next to the dialed
number.
Ô
CALLER ID
OPERATION
If you subscribe to a Caller ID service, the
phone automatically displays information
about calls you receive and stores the
information in memory. The system can
store up to 64 incoming phone numbers and
incoming names into call records.
Ô
R
EVIEWING
C
ALL
R
ECORDS
1. Repeatedly press d or e to review the
new calls. END OF NEW CALL appears
when all calls have been reviewed.
2. To review all the records from oldest to
newest, repeatedly press REVIEW e .
To review the records from newest to
oldest, repeatedly press
d REVIEW .
After reviewing all records in memory,
END OF LIST appears.
3. If an incorrect, invalid or incomplete
Caller ID signal is received, LINE ERROR
appears on the display.
If the name and number are not
available due to the caller’s restriction,
PRIVATE CALL appears on the display.
If the name and number are not
available,
–UNAVAILABLE- appears on the
display.
RPT appears beside a number if you
have received a call from the same
phone number more than once.
4. If you do not press a button within about
15 seconds, the system automatically
returns to the normal display.
Ô
C ALL B ACK FROM
C ALLER ID M EMORY
1. With the handset on the base, press d
or e to find the number to redial.
2. Press CALL BACK twice. PICK UP CALL
appears.
3. Lift the handset, and the number is
automatically redialed.
Select one of the four options below based
on your telephone company’s requirements
to make toll calls within your area code.
Option1
1 + Area Code + 7-digit number (11 digits)
Option 2
1 + 7-digit number (8 digits)
Option 3
Area Code + 7-digit number (10 digits)
Option 4
7-digit number
1. With the handset on the base, press d
or e to find the number to redial.
2. Press CALL BACK . The 7- or 11-digit
number flashes.
3. Press d or e to select one of the above
four options.
4. Press CALL BACK again to confirm. Ô
5. Pick up the handset, and the selected
number is dialed automatically.
D
ELETING
C
ALL
R
ECORDS
You can delete an individual call record, or
all call records stored in the system.
Ô
To delete a single call record, press d or e
until the call record you want to delete
appears, then press
DELETE twice. The
record is deleted, and the remaining call
records are automatically renumbered.
To delete all of the call records after
reviewing all new calls, hold down
DELETE
for about three seconds. ERASE ALL CALLS
appears. Press DELETE . The system deletes
all call records, NO CALLS appear, then
TOTAL:00 NEW:00 appears.
FCC STATEMENT
This phone is hearing aid compatible.
Your telephone complies with Part 68 of FCC Rules and
the requirements adopted by the ACTA. On the back of
this product is a label with this product’s FCC Product
Identification number in the format DYFMT08B433909. If
requested, you must provide this information to the
telephone company.
Note: You must not connect your telephone to:
• coin-operated systems
• most electronic key telephone systems
• party-line systems
Ô NOTE Ô
• If you do not have any special phone
services, pressing FLASH might disconnect
the current call.
Using Pause
• Redial memory holds up to 32 digits, so you
can redial long distance, as well as local
phone numbers.
• When you redial a number, the telephone
pauses for about four seconds at the pause
entry. For long pauses, press
REDIAL/PAUSE again.
Caller ID Operation
• During an incoming call, the phone company
automatically sends the correct time
between the first and second rings to update
your system’s display.
• After reviewing all calls, the system resets so
that the display shows 0 new calls.
Call Back from Caller ID Memory
• When the caller’s phone number has a
different area code from the preset area
code, 1 and the caller’s three digit area code
are inserted automatically during memory
call back.
• When the caller’s phone number has the
same area code as the preset one, 1 and the
three digit area code are deleted
automatically during the memory call back.
Deleting Call Records
• When the phone’s memory is full, it
automatically replaces the oldest call record
with the newest incoming call.
• If you do not press any button within about
15 seconds while the display shows
ERASE
ALL CALLS , the phone automatically returns
to normal display and the call records are not
deleted.
Ô NOTE Ô
• If you do not have any special phone
services, pressing FLASH might disconnect
the current call.
Using Pause
• Redial memory holds up to 32 digits, so you
can redial long distance, as well as local
phone numbers.
• When you redial a number, the telephone
pauses for about four seconds at the pause
entry. For long pauses, press
REDIAL/PAUSE again.
Caller ID Operation
• During an incoming call, the phone company
automatically sends the correct time
between the first and second rings to update
your system’s display.
• After reviewing all calls, the system resets so
that the display shows 0 new calls.
Call Back from Caller ID Memory
• When the caller’s phone number has a
different area code from the preset area
code, 1 and the caller’s three digit area code
are inserted automatically during memory
call back.
• When the caller’s phone number has the
same area code as the preset one, 1 and the
three digit area code are deleted
automatically during the memory call back.
Deleting Call Records
• When the phone’s memory is full, it
automatically replaces the oldest call record
with the newest incoming call.
• If you do not press any button within about
15 seconds while the display shows
ERASE
ALL CALLS , the phone automatically returns
to normal display and the call records are not
deleted.