Rose electronic Vista Mini - Manual (Page 9)

The connectors
All cables are connected at the Vista Mini’s side and rear panels. The side pan-
els are used to connect to the computers. The rear panel is to connect the key-
board, monitor, mouse, and speakers. For these you do not need an adapter
cable, since these should plug in directly.
Table 3. The rear panel
Panel Label Connector Description
1,2 DB25 female
or HD15 /
mini-din6
/mini-din 6 /
3.5 mm stereo
jack
Computers are connected at these ports us-
ing CPU adapter cables. You must have an
adapter cable for each CPU you plan to con-
nect.
VGA MONITOR HD15 female Connect the VGA monitor directly to this
connector.
PS/2 MOUSE Mini-din 6 fe-
male
Connect the PS/2 mouse directly to this con-
nector.
PS/2 KEYBOARD Mini-din 6 fe-
male
Connect the keyboard directly to this con-
nector.
SPEAKERS 3.5mm stereo
jack
Connect the speakers, either powered or
unpowered to this jack.
5 VIStA MINI INSTALLATION AND OPERATION MANUAL