Roberts Radio Gemini 45 RD-45 - Manual (Page 6)

Using the AC adaptor
The AC adaptor for use with the RD45 should provide 7.5 volts DC output
at 900mA centre pin positive.
1. Insert the adaptor plug into the DC in socket on the rear of your
radio.
2. Plug the adaptor into a standard 13A mains socket outlet. Whenever
the adaptor is used the batteries are automatically disconnected.
The.AC.adaptor.should.be.disconnected.from.the.mains.supply.and.
the.radio.when.not.in.use.
• IMPORTANT: The mains adaptor is used as the means of connecting
the radio to the mains supply. The mains socket used for
the radio must remain accessible during normal use. In order
to disconnect the radio from the mains completely, the mains
adaptor should be removed from the mains socket outlet
completely.
5