Roberts Radio Gemini 45 RD-45 User Manual

Page 10

Finding new stations - DAB

As time passes new stations may become available. To find new stations

proceed as follows:-

1. Press and release the

Auto Tune button, your radio will perform a

scan of the UK DAB frequencies. As new stations are found the station

counter on the right-hand side of the display will increase and stations

will be added to the list.

2. To carry out a full scan of the entire DAB Band III frequencies press

and hold down the

Auto Tune button for more than 2 seconds and

then release. The station counter on the right-hand side of the display

will increase and stations will be added to the list.

Signal strength display - DAB

1. Press and release the Info button until the display shows signal

strength.

2. Position your radio and carefully angle the telescopic aerial for best

reception using the signal strength display as a guide. Move your

radio around and position so as to give maximum number of black

rectangles on signal strength display. The clear unfilled rectangle

indicates minimum signal level required for satisfactory reception.

3. Press the Info button to exit the signal strength display.

1,3