Runco VX-5000ci - Manual (Page 32)

30
Step 5: Remove the Lens and Motor Assembly by
pulling forward and to the left in order to
clear the Projector chassis with the Motor
Assembly.
Step 6: Install new Lens Assembly in reverse
order. Make sure to route the wire harness
(Item 4) in original position and away from
moving lens stages and Motor Assembly to
prevent unexpected disconnect or lens
damage. --See Figure 6 Below--
Install New Lens Assembly
VX-5000ci Projector (front view) with Lens Assembly
completely removed.
Figure 6
Figure 5
Figure 4