Raymarine Satellite TV Systems - Manual (Page 38)

34 Raymarine Satellite TV Systems
Setting the DiSEqC method
1. Press YES to enter set up mode.
2. Press NEXT 4 times to go to the Use
DiSEqC menu.
3. Press YES to enter the DiSEqC menu.
4. Select the DiSEqC method*
NEXT - shows next DiSEqC method.
SELECT - sets the displayed method.
EXIT - returns to main set up menu.
D7973_1
SETUP MODE?
YES NO
D7974_1
SET SAT PAIR?
PREV YES NEXT
D8000_1
USE DISEQC?
PREV YES NEXT
D8001_1
DO NOT USE DISEQC
PREV SELECT NEXT
5. Press YES to accept the selection.
Press NO to cancel and return to main
set up menu.
* DiSEqC method
DO NOT USE DISEQC - DiSEqC is not used.
USE TO CHANGE BAND - DiSEqC is used to change high and low bands
(Europe).
USE TO CHANGE SAT - DiSEqC is used to change satellite being tracked (US -
DirecTV).
D7977_1
SAVE?
YES NO
81258_3.book Page 34 Wednesday, November 8, 2006 2:06 PM