Set up, Ex-lrt only) – RedMax EXZ2401S-BC User Manual

Page 15

6. Set up

(EX-LRT only)

EX-LRT
SE1

■ ATTACHING THE TRIMMING MECHANISM (SE1)
1. Remove the screw screwed into the end of the

trimming mechanism.

2. Insert the end of the trimming mechanism into

the main pipe.

3. Line up the hole on the end of the trimming

mechanism into which the screw is to be
inserted with the hole on the main pipe, and
screw the screw firmly in.

4. Using a wrench, screw in the bolt provided to fix

the trimming mechanism into place.

(1) Main pipe
(2) Trimming mechanism
(3) Screw hole
(4) Screw
(5) Fastening bolt

■ BALANCE UNIT
1. Put on strap and attach unit to strap.
2. Depending on the working posture, slide clamp

up or down until unit balances and the strap fits
your body.

15 