Roberts Radio CR9952 - Manual (Page 14)

General
Do not allow this unit to be exposed to moisture (e.g. dripping or splashing) or to temperatures exceeding 70 degrees centigrade. It is recommended
that the FM band be used wherever possible as better results in terms of quality and freedom from interference will usually be obtained than on
the MW band.
Specifications
Power Requirements
Mains AC230 volts, 50Hz~ only
Adaptor Output DC4.5 volts, 300mA
Battery 4 x LR6 (AA Size) alkaline
Frequency Coverage
FM 87.5 - 108MHz
MW 525 - 1605kHz
Circuit Features
Loudspeaker 8 ohms
Output power 0.8 Watts
Aerial System FM Wire Aerial
MW Built-in Ferrite Aerial
The Company reserves the right to amend the specification without notice.
13