beautypg.com

Roberts Radio CR9952 User Manual

Page 12

background image

11

Using the AC adaptor

Your clock radio is supplied with a Mains Adaptor.

1.

Place your clock radio on a flat surface.

2.

Insert the adaptor plug into the DC socket located on the rear of your
clock radio.

3.

Plug the adaptor into a standard 13 amp mains socket outlet.
Whenever the adaptor is used, the batteries are automatically
disconnected.

The AC adaptor should be disconnected from the mains supply and
the radio when not in use. The AC adaptor for use with the CR9952
should provide 4.5 volts DC output at 300mA, centre pin negative.

We would recommend for economy that your radio is used via the
AC adaptor whenever possible with battery operation for occasional
or stand-by use only.

See also other documents in the category Roberts Radio Clock: