Radio Shack ET 1754 - Manual (Page 9)

9 Operation
USING THE DATA PORT
The phone is equipped with an extra phone
jack that allows you to connect a communi-
cation device (a computer modem, answer-
ing machine, or fax machine) to Line 2.
Connect a line cord (not supplied) from the
communication device to
DATA on the back
of the phone.
Note: You cannot use Line 2 while a comput-
er modem or fax machine is connected to
DATA and in use. Line 1 still functions nor-
mally. When you are finished using the mo-
dem or fax machine, Line 2 becomes
available again.
The USOC number of the data jack to be in-
stalled is RJ11.
SWITCHING BETWEEN
LINES
Making a Call on Another Line
1. Press HOLD to place the first call on
hold.
2. Press the LINE not in use, then dial the
desired number.
3. Press the first call’s LINE at any time to
return to the first call.
Answering a Call on Another Line
1. Press HOLD to place the first call on
hold.
2. Press the flashing LINE to answer the
incoming call.
3. To switch back to the first call, press
HOLD to place your current call on hold.
4. Press the other LINE to return to the first
call.
MAKING A CONFERENCE
CALL
1. Make or answer a call.
2. Press HOLD , then make or answer a call
on another line.
3. When the second call is connected,
press CONF . The lines are immediately
connected.
4. To end the conference call, hang up.
Both parties are disconnected, or you
can press a
LINE if you wish to continue
with the call on that line. The party on
the other line is disconnected.