beautypg.com

Safety instructions – RBH Sound SA-200 User Manual

Page 10

background image

Safety Instructions

CAUTION! DO NOT open the amplifier, attempt any modifications or repairs.

There are extremely high voltages present and any servicing must be referred

to RBH Sound or an authorized qualified technician.
ATTENTION! Opening the amplifier will void warranty.
WARNING! To prevent shock or fire hazard, never permit moisture or any

liquid to get into the amplifier. If an accidental spill occurs, immediately

shut off the power, unplug its A/C power cord and seek a qualified

technician for repair.
CAUTION! To reduce the risk of electric shock, do not remove the cover (or back).

No user serviceable parts inside: refer servicing to qualified technician.
All safety instructions should be read before this amplifier is operated. Please

retain these safety instructions for future reference. Adhere to all warnings

on the amplifier and in this manual.
Ventilation: The amplifier should be situated so that its location or position

does not interfere with its proper ventilation. The amplifier should not be

situated on a bed, sofa, rug or similar surface that may block the ventilation

openings, nor should it be placed in a built-in installation such as a bookcase or

cabinet that may impede the flow of air through the ventilation openings.
Power Source: The amplifier should only be connected to a power supply of

the type described in this instruction manual or as marked on the amplifier.

Precautions should be taken so that the grounding or polarization means of

the amplifier are not defeated.
Power Cords: Power supply cords should be routed so that they are not likely

to be walked on or pinched by items placed upon or against them, paying

particular attention to wall receptacles and the point where they exit from

the amplifier.
Object and Liquid Entry: The amplifier should not be exposed to dripping

or splashing and objects filled with liquids, such as vases or plants, should

not be placed on top of or next to the amplifier. Care should be taken so that

objects do not fall and liquids are not spilled into the enclosure through its

ventilation openings.
Damage Requiring Service: This amplifier should be serviced by a qualified

technician when:

— The power supply cord has been damaged; or

— Objects have fallen or liquid has been spilled into the amplifier; or

— The amplifier does not appear to function normally or exhibits a

marked change in performance; or

— The amplifier has been dropped or the enclosure is damaged.

9