Radio Shack ET-532 - Manual (Page 10)

10
• You can make or answer a call on
a phone on the same line as the
cordless phone, even if the hand-
set is away from the base.
• RANGE appears when the dis-
tance from the handset to the
base is out of the phone’s range.
• The keypad lights on the handset
turn off if no button is pressed for
more than 13 seconds.
REDUCING
INTERFERENCE
To reduce interference, press CH to
switch to the next channel (10 chan-
nels in all) until you receive the best re-
ception.
CH and the channel number
appear on the display.
USING REDIAL
To quickly redial the last number you
dialed, simply lift the handset from the
base and press
TALK again so the
CHARGE/TALK indicator lights, and
then press
REDIAL . The redialed num-
ber appears on the display.
The redial memory holds up to 80 dig-
its in the tone mode or 81 digits in the
pulse mode. The redial memory also
holds pause entries (see “Entering a
Pause” under “Memory Dialing”).
Note: We recommend you not use RE-
DIAL to dial numbers that include a
tone (*) entry (see “Using Tone Servic-
es on a Pulse Line”).
USING FLASH
Use FLASH on the handset to perform
the switchhook operation for special
services, such as call waiting.
43-1032.fm Page 10 Tuesday, August 17, 1999 9:41 AM