Roberts Radio solarDAB 2 User Manual

Page 21

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Scan sensitivity setting - FM

Your radio will normally scan for FM broadcasts which are strong enough
to give good reception. However, you may wish the Auto-scan function
to also be able to ﬁ nd weaker signals, possibly from more distant radio
transmitters. Your radio includes a local / distant option for the Auto-scan
function.

1. Press

the

On/Off button to switch on your radio.

2. If needed, press the DAB/FM button to select the FM band.

3. Press and hold the Info button until the display shows "FM Scan

Zone" then press the Tuning control to enter the scan zone selection
menu.

4. Rotate

the

Tuning control to switch between Local and Distant options

on the lower line of the display. The Distant option will allow the radio
to ﬁ nd weaker signals when scanning.

5. Press and release the Tuning control to conﬁ rm your selection. The

radio will then revert to the normal information display. The Local or
Distant setting is stored in the radio and remains in force until changed
or until a System Reset.

Note: The initial setting (out of the box, or after a System Reset) causes
the radio to ignore weaker (or more distant) signals.

3-5