Roberts Radio solarDAB 2 User Manual

Page 14

Dynamic Range Control settings - DAB

Dynamic Range Control (also known as DRC) can make quieter sounds
easier to hear when your radio is used in a noisy environment.

1. Press

the

On/Off button to switch on your radio.

2. Press and hold in the Info button. The display will show “Manual

tune.”

3. Rotate

the

Tuning control until the display shows "DRC".

4. Press and release the Tuning control to enter the adjustment

mode.

5. Rotate

the

Tuning control to select the required DRC setting (the

default is 0).

DRC 0 - DRC is switched off, Broadcast DRC will be ignored.

DRC 1/2 - DRC level is set to 1/2 that sent by broadcaster.

DRC 1 - DRC level is used as sent by broadcaster.

6. Press and release the Tuning control to conﬁ rm the setting. The

display will return to normal tuning mode.

Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.

3-6