Radio Shack PRO-66 - Manual (Page 23)

23
3. To change the search direction, press t to search downward or s to
search upward. b , SRCH , and t or s appear on the display.
4. When the scanner stops on an active frequency, you can do one of
the following:
• To store the displayed frequency into the monitor memory,
press MON/0 . MON appears on the display.
• To continue the search, press t or s.
• To hold the frequency, press HOLD/BAND . H appears on the
display. To continue the search, press and hold t or s for about 1
second. Or, you can press
HOLD/BAND to continue the search.
The scanner briefly displays the frequency band (if you pressed
HOLD/BAND ), then resumes searching.
Notes:
• If you want to step through the frequencies while H is displayed,
press t or s.
• If you tune to a search skip frequency, L appears on the display.
See “Search Skip Memory” on Page 24.
• If you want to change the frequency band, repeatedly press
HOLD/BAND . The selected frequency band is displayed.
Direct Search
You can search up or down for more frequencies from the currently dis-
played frequency.
1. Press MANUAL .
2. Use the number keys and CLEAR/• to enter the frequency (includ-
ing the decimal point) where you want to start the search, or enter
the channel number containing the starting frequency and press
MANUAL .
3. Press t to search downward or s to search upward from the
selected frequency. d , SRCH , and t or s appear on the display.
4. When the scanner stops on a transmission, you can do one of the
following:
• To store the displayed frequency into the monitor memory,
press MON/0. MON appears on the display.
20-511.fm Page 23 Wednesday, August 4, 1999 2:13 PM