Radio Shack PRO-66 - Manual (Page 11)

11
1. Connect the adapter’s blue-tipped barrel plug to the adapter’s cord
and set the barrel plug’s tip to positive.
2. Insert the adapter’s blue-tipped barrel plug into your scanner’s
POWER jack.
Note: If you installed rechargeable nickel-cadmium batteries in the
scanner, remove the plastic cap from the
CHARGE jack and put the
cap in the POWER jack. Connect the AC adapter to the CHARGE
jack. This powers the scanner and recharges the batteries at the
same time. See “Charging Nickel-Cadmium Batteries” on Page 13.
3. Plug the adapter’s power module into a standard AC outlet.
20-511.fm Page 11 Wednesday, August 4, 1999 2:13 PM