RCA TRC-236 - Manual (Page 20)

20
TRANSMITTING
1. Follow Steps 1–5 in “Receiving
Transmissions and Adjusting
Squelch” on Page 18.
2. To increase the transmitted signal
strength and increase the TRC-236’s
range, set
POWER HI/LO on the side
of the TRC-236 to HI .
To decrease the transmitted signal
strength and save battery power, set
POWER HI/LO to LO .
3. Hold the TRC-236 2 to 3 inches from
your mouth. Hold down PUSH TO
TALK on the side of the TRC-236
and speak in a normal voice into the
microphone.
When you finish speaking, release
PUSH TO TALK .
Note: Do not speak too loudly when
transmitting. It does not make your
signal any stronger, and might distort
your transmission.
Micro-
phone
21-1649.fm Page 20 Thursday, August 5, 1999 11:33 AM