RoyalTek RCD-3000 User Manual

Page 4

English

1.3 Install RCD-3000 in your vehicle

(A) Volume control: Rotate forward and backward to adjust the volume.

(B) Mini USB port: Connect with the USB Cable for data transfer or battery charging purpose.

Place the Dashboard Pad on your dashboard as close to the windscreen as possible in clear view of the driver’s line

of sight.

Place your RCD-3000 device on the dashboard pad, which is designed to hold it firmly in place.

The RCD-3000 has build in Li-ion battery; user also can connect the USB cable to the cigar lighter adapter provided

and insert the other end to s USB port. Once you turn on the.

1.4 Product Notification- Using Tips

1. Use the supplied dashboard pad, remove the backing from the base, fix it on the dashboard as close to

the windscreen as possible in clear view of the driver’s line of the sight and place your Detector onto the

pad

2. Cars that are equipped with heat dissipation films for the windshield and windows will degrade the GPS

performance.

3. For the most accurate position fix results and quickest acquisition time, please make sure that your device

is not in motion but stationary and in open spaces.

4. Connect to PC or Notebook for “Speed Camera Detector Utility”

@User can update the Camera database and manage the POI points using the supplied “Speed Camera

Detector Utility”.

Refer to the software installation and usage to install the software utility.

*POI: point of interest

5. We invite the driver to respect the driving rule and the law. We assume no any responsibility for any

damage or injury resulting from the wrong use of the product.

(B) Mini USB Port

(A) Volume Control

(C) Power Button

GPS Antenna