Pip troubleshooting, Pip buttons: general explanation, Features and menus – RCA Home Theatre P56926 User Manual
Page 54: Arrow buttons
Features and menus
52
1
2
3
4
5
6
7
8
9
0
WHO INPUT
ANTENNA
REC•VCR+
STOP
PAUSE
REVERSE
PLAY
FORWARD
PIP
SWAP
CH CTRL
RESET
MENU
CLEAR
GUIDE
INFO
SOUND
GO BACK
CH-
MUTE
SKIP
DVD
VCR
2
AUX
SAT•CABLE
VCR
1
ON/OFF
TV
CH+
VOL
VOL
OK
Arrow
buttons
PIP Buttons: General Explanation
The buttons on the remote control that you’ll use for the PIP feature are
explained below:
PIP Press the PIP button to make the PIP window appear on the screen.
Press PIP again to remove the window.
If you selected Alternate with PIP button in the PIP Closed-Caption
Display menu, press the PIP button when the PIP window is on the screen
to toggle between PIP on, PIP on with closed captions, and PIP off.
Arrow buttons (left, right, up, and down) Move the PIP window to
different areas of the screen.
CH CTRL (channel control) Lets you switch channel control between
the PIP window and the main picture. To determine whether you are
controlling the PIP or the main picture, look at the TV screen: the yellow
channel number is the one you are controlling. Press CH CTRL to change
which picture you’re controlling.
SWAP Switches, or “swaps,” where the two pictures appear on the TV
screen. The smaller PIP picture swaps to the main screen and the main
picture goes to the little PIP window.
The buttons on the remote control that operate the
PIP feature include: the four arrow buttons, CH
CTRL, PIP and SWAP.
PIP
buttons
PIP Troubleshooting
If you use a cable box, you must connect a splitter in order for PIP (picture-in-picture) to work. You must also check some
settings in your TV’s menu system in order for all of the GUIDE Plus+ Gold System features to work. Please follow the
instructions below. If you have trouble, contact your cable company.
1. Connect as shown.
2. Turn on the TV and press MENU on the
remote (the TV MAIN MENU appears).
3. Select GUIDE Plus+ Menu (press 7 on the
remote control).
4. Keep advancing through the screens until
you come to the one that asks you if you
have cable. Select Yes.
5. The next screen asks you if you have a cable
box, press the arrow down button to
highlight No. Then press OK.
For additional Troubleshooting information go to the end of this section.
VIDEO OUT
ANTENNA IN
R
VCR
L
CABLE BOX
AUDIO OUT
CABLE SPLITTER
TV
VIDEO IN
L
R
AUDIO IN
CABLE IN
From Cable Line
CABLE IN
TV OUT