Operation – RedMax BC3400DL User Manual
Page 12
❲
12
❳
• Keep bystanders and animals at least 50
feet (15m) away from the operating
point. If you are approached,
immediately stop the engine.
■
STARTING ENGINE
1. Rest the unit on a flat, firm place. Keep the
cutting head off the ground and clear of
surrounding objects as it will start rotating
upon starting of the engine.
2. Pump the primer until fuel flows out in the
clear tube.
3. Move the choke lever upward to close the
choke.
WARNING
Operation
4. Shift the ignition switch to the START
position.
5. (For BC2300DL/BC2600DL/BC3400DL)
• While pulling the throttle lever with the little
finger of your left hand, pull the starter
rope.
(For BC4400DW)
• Lock the throttle lever at the start position
as shown in the figure right. While holding
the unit firmly against the ground, pull the
starter rope vigorously.