Set up – RedMax BC3400DL User Manual

Page 10

■

CONNECTING SWITCH WIRES

• Connect the switch wires between the

engine and the main unit. Pair the wires of
the same color.

■

PUTTING ON WAIST PAD

(BC4400DW only)
• Warp the waist pad around the shaft tube

and the throttle wire.

❲

❳

Set up

■

INSTALLING CUTTING HEAD

1. While locking the gear shaft by inserting

the attached bar into the upper holder and
the gear box, loosen and remove the
hexagon bolt(left-handed)

2. Fit the spacer attached to the head

assembly between the upper and lower
holders. Then screw in the cutting head to
the gear shaft over the holders. Hand-
tighten it securely.

This manual is related to the following products: