Ricoh RDC-6000 - Manual (Page 15)

13
• All items of information are shown for illustration purposes. During actual
camera operation, only the relevant items are displayed.
■ Warning Message
If any of the warning messages listed below appear on the camera’s LCD monitor,
read the corresponding explanation and take the corrective action suggested.
Note
Warning
Message
Status Explanation and Remedy
Reference
Page
Flashing
Lit
Flashing
Flashing
Lit
Flashing
Flashing
Flashing
Flashing
Indication low batteries. Have
replacement batteries ready
System in processing
The SmartMedia Memory Card has
run out of memory
The SmartMedia memory card is out
of position. Mount a SmartMedia
memory card
There are no files to play.
Mount a SmartMedia memory card
with files recorded on it.
A write-protected SmartMedia memory
card is found. Remove the write
protection label from the card to gain
access to it
You attempted to play an unplayable
file.
No more file numbers can be added.
Insert a new SmartMedia memory
card to continue recording.
The date has not been set. Set the
date before starting operations with
the camera.
P.27
–
P.29
P.30
P.74
P.29
P.74
P.30
P.33
CARD FULL
NO CARD
NO IMAGE
WRITE
PROTECTED
UNMATCHED
FILE
FILE
NUMBER
OVER
SET DATE/
TIME