beautypg.com

Using the recording control, Care and maintenance – Radio Shack 43-1236 User Manual

Page 3

background image

3

2. The

A/B

switch lets you set the

switch polarity to match that of the
tape recorder used with the con-
trol. Set

A/B

to the position that

stops recording when you are not
using the phone line.

Start by setting

A/B

to

A

. Then put

a cassette tape into the recorder
and press the record button. If the
tape moves, set

A/B

to

B

. If the

tape did not move, leave

A/B

set

to

A

.

3. To test the control, lift the handset

of any phone on the telephone
line. The tape should start moving
and recording should begin. Hang
up the phone. The tape should
stop.

USING THE RECORDING
CONTROL

To record a call, set

RECORD/PLAY-

BACK

to

RECORD

. The recorder auto-

matically records all phone calls you
make and receive.

Illustration

Illustration

To stop recording, stop the recorder.

To play the cassette tape, set

RECORD/PLAYBACK

to

PLAYBACK

and follow the instructions in your tape
recorder’s owner’s manual to rewind
and play the tape.

CARE AND
MAINTENANCE

To enjoy your RadioShack Multi-
Phone Recording Control for a long
time:

• Keep the control dry. If it gets wet,

wipe it dry immediately.

• Use and store the control only in

normal temperature environ-
ments.

• Handle the control gently and

carefully. Don’t drop it.

• Keep the control away from dust

and dirt.

• Wipe the control with a damp cloth

occasionally to keep it looking
new.

Modifying or tampering with the con-
trol’s internal components can cause a
malfunction and might invalidate its
warranty. If your control is not per-
forming as it should, take it to your lo-
cal RadioShack store for assistance. If
the trouble is affecting the telephone
lines, the phone company can ask you
to disconnect your control until you
have resolved the problem.

43-1236.fm Page 3 Wednesday, August 18, 1999 9:05 AM