Roberts Radio 997 - Manual (Page 6)

5
Mains operation
1. Place your radio on a fl at surface.
2. Plug the mains lead into the mains socket located on the rear of your
radio ensuring that the plug is pushed fully into the socket.
3. Plug the other end of the mains lead into the wall socket and switch
on the wall socket. Whenever the mains is used the batteries are
automatically disconnected.
IMPORTANT: The mains plug is used as the means of connecting the
radio to the mains supply. The mains socket used for the radio must remain
accessible during normal use. In order to disconnect the radio from the
mains completely, the mains plug should be removed from the mains
socket outlet completely.